Showing posts with label Update. Show all posts
Showing posts with label Update. Show all posts

Wednesday, June 5, 2013

Update of Our Aquaponics Build at Sowles Well Service June 4th 2013




Published on Jun 4, 2013
 
Recorded on June 4, 2013 using a Flip Video camera. Hello All I lost about four minutes of this clip because I trimmed the wrong way. Sorry about that. Yeah I am still learning to use the FlipCam and It's Simple software.

Hey I told if I can do It you can too. I am No rocket Scientist thats for sure. But I never claimed to be. I will need to do some more work on the sump pit box and I still want to get the other two tanks cut and their bladders removed and cleaned up and ready.

I will be looking at some Bulk head fittings that we have here at the house. We got a couple lots at an Auction a while back and I'll have to see what I can dig out out the creates that I can make do the job. There is not a lot of pressure in these systems. Everything can be unglued and hand tight; well mostly everything.

I got the longer cut offs up to the Green house and I still need to fit them together as the other cut offs were just to much to piece together. I was losing my mind trying to figure it out. So now it is easy three ten foot pieces for each thirty foot run and two couplings for each pipe. They'll sit nicely on the cement blocks and it will make it easier to clean out when the time comes.



As I said this is being done on the fly nightly after work and I work on It when I can to the beat of a different drummer sort of speak. As I don't drive I have to work around the boss's schedule.

But It will get done eventually. The box is just some thing to keep the dirt out of It. The ground is mostly clay kind of like modeling clay soft and mold able when wet or moist. Hard as brick when dry. So I will line the bottom of the pit with patio blocks and cover it with a lid. This will help keep It cool in summer. Warm in winter and keep debris from entering the tanks as well.



As I was saying I laid out the piping for the feed troughs that will be outside this year. If I get them in time. I don't have a whole of time left to get this part up and running for this years growing cycle. But if I do run with it. I can always throw a quick Hoop house up with this cattle panel stuff. Its fast and easy and very reasonable. But I think I'll use six by six's instead of the Telephone poles if it come to rushing this Green house build. They are much lighter and easier to set. But I am cheap so I'll have to see how fast it needs to be slapped up.



I should just cut four more telephone poles up shouldn't I, Hum. I might do that and have them ready or even set them. First I want to see if I can grow anything. Speaking of I need to start my seeds this week.

I pressure washed the holding tank and the large fish tank as well I got the top cut out of the fish tank. I did that with a grinder and a cutting wheel. It was very easy; messy but easy. I used the dirt from the sump pit to refill the dirt box and placed the rest in front of the dirt box so I could climb straight onto It with out a ladder. I'll Land scape that up some and then I'll get some more dirt from the dirt hills from the pond. And then I'll do the same with the sump pit on two sides, the front and the right side or the west side. On the east side is where the well is and the south side faces the Green house so I'll keep them level, but I will use only wood chips on the Green house side as this is where the plumbing will be.



Getting closer YouTube I have tons to do still, but most of this stuff will go rather quickly once I get the tanks plumbed. I found my fish for this year. I am not sure if there Channel cats or Bull heads. But there are three balls in my uncles pond right now as of today. But if I wait to long the bass will devourer them before I get them into a tank. And the water is way to cold for me to brave It. I'll need a John boat or canoe and a net.

There is usually about hundred Frys in a ball like the ones in the pond, but as I said you don't have much time to catch them before the bass or some other fish or bird eat them up.

The pond is all open water no trees and not many places to hide in for these little guys that's why they ball up the way they do. Protection!

I have a large fifty gallon metal trough I could drag it over there and try to snag about fifty or sixty or even more. And keep them covered at the waters edge. I'll see. I don't have too much Time on my hands, but we'll see what we can do.




If their Channels I grow them Out for eating. If their Bullheads I'll cut them lose in the river or give them to the neighbor for his pond.

Well I got to run. I need to get showered and go to bed. Busy day tomorrow if I want to catch some of those Frys I'll need to be rested.

 
 
Somebody Come and Play Today! Earn as You Learn, Grow as You Go!

The Man Inside the Man
from
Sinbad the Sailor Man
A
JMK's Production


Share this page




TTFN
CYA Later Taters!
Thanks for stopping by.

Donnie/Sinbad the Sailor Man

P.S. Sweet Sixteen My Breakout Year's Hottest and Fastest Growing Biz Op? Do You Want In? If You Do! Click Here and Sign Up!
 
 

Thursday, May 30, 2013

Update of Our Aquaponics Build at Sowles Well Service May 28th 2013




Donald Beres Jr
Published on May 28, 2013
 
Recorded on May 28, 2013 using a Flip Video camera. This one is another short one. My batteries were about drained. I just wanted to show you all I got the major part of the sump pit dug today. And that I straitened up some.

Well I got to run because I am under the Gun.

 P.S. Sorry the Video stopped suddenly because the Battery died. I was saying I'll have to take the one thousand gallon tank down and add some more dirt and then water it down and pack it down into the dirt box. I should of known better, but I am doing this all on the fly after work And I am tried after the day is done. Again I'll do better as I get some extra time. CYA !



Well I finally got it over here for ya's guys. I am stuck for cash right now so I'll need to find some more. I need to order some stuff from off the Web.  Mostly uni seals. I'll need to get some treated plywood  three 1/2 inch x 8 ft x 4 ft about three sheets; to line the sump pit.

 I still need more cement blocks about 12, and some 2x2 patio blocks about 8 to put a floor into the sump pit for the tanks to sit level upon. But I did get most of the grass cut today  May30th 2013. And then the mower started to act up. I think we'll need to flush the fuel lines or clean the tanks out even. It's a Big mower a Dixie Chopper a good mower to have for large lawns. 

I truly need to get my seeds going too. Maybe I'll get to it this weekend. Sunday maybe. Well I have the advantage of the Ponds water to jump start our system here. But for one guy it is a lot of work to do. Especially when you are disabled somewhat. But I am lucky to have the tools and equipment at my disposal as some of you may not. Hopefully you have a couple of strong backs and a weak mind or two you can tap into. LOL

It shouldn't be long now. I'll get something done here soon, but I am worn out already and I haven't even begun yet. But this I hope is the hardest part of this Aquaponics stuff; the build. I hope anyways. Well I talk at ya's soon.


P.S. I posted these videos first at youtube and leave them there a day or two. So I can search them out and then place them here. Plus it takes these older computers of mine so long to upload videos. I am ready for bed by the time there done. And I have a bad memory as well.    

 
 
Somebody Come and Play Today! Earn as You Learn, Grow as You Go!

The Man Inside the Man
from
Sinbad the Sailor Man
A
JMK's Production


Share this page





TTFN
CYA Later Taters!
Thanks for stopping by.

Donnie/Sinbad the Sailor Man

P.S. Sweet Sixteen My Breakout Year's Hottest and Fastest Growing Biz Op? Do You Want In? If You Do! Click Here and Sign Up!
 
 

Tuesday, May 21, 2013

Update of the Aquaponics Build at Sowles Well Service~ May 20th 2013 {Part I of IV}

The Aquaponics Build Brought to You

by

 Poetry Writes & Other Stuff

from 

Sinbad the Sailor Man

Update of the Aquaponics Build at Sowles Well Service~ May 20th 2013 {Part I of IV}



Donald Beres Jr
Published on May 20, 2013
 
Recorded on May 20, 2013 using a Flip Video camera. Well these next few videos are chopped up some my battery was dying and I am still under a 10 minute limit plus I don't have any extra editing software yet. But I said I'd try and post when I get something done so here it is. I will however place them all in the same Blog Posting so you can find them.

 Update of the Aquaponics Build at Sowles Well Service~ May 20th 2-13 {Part II of IV}



Published on May 20, 2013
 
Recorded on May 20, 2013 using a Flip Video camera. Sorry I have still got a Ten Minute Limit on my videos and I lack the editing skills and software to edit this videos, but I am working on it too. Yea I got out of square a little I was using a rope and not string so That may of through me off a bit. Funny how things work my other cousin came by after the Cattle Panel was up today and Gave me a big spool of string. Well its good cotton string and I'll use it to tie tomatoes and beans etc. I had to trim three minute off this video to get it to load from my FlipShare software.

As soon as I get the uni seals and the NFT Pipes glued to the same length and all the holes cut I'll put water in the one thousand gallon tank. But before all that I 'll need to get the six Inch drain install as well as the sump pit and all the filtering tanks. Well I got to run because I need to make some more dough.
TTFN
CYA Later Taters
Thanks for watching.

Donnie/ Sinbad the Sailor Man

 Update of the Aquaponics Build at Sowles Well Service~ May 20th 2013 {III of IV}


Donald Beres Jr
Published on May 20, 2013
 
Recorded on May 20, 2013 using a Flip Video camera. I am sorry I am not that skilled yet at making these videos but I'll keep trying until I am. Here is the 400 gallon Fish tank and my zone tanks. I am also doing all this on the fly after work as I don't drive my cousin picks me up and take me home at his convenience and I don't always have the time to get everything in here But I will try and update the videos at the Blog later when I get the spare time to think and plan. Well I go to run because I am under the gun.

TTFN
CYA Later Taters
Thanks for watching.

Donnie/ Sinbad the Sailor Man

 Update of the Aquaponics Build at Sowles Well Service~ May 20th 2013 Part {IV of IV}


Published on May 20, 2013
 
Recorded on May 20, 2013 using a Flip Video camera. Here I am showing my taller sump tank and describing what I still need to do to It.

TTFN 
CYA Later Taters
Thanks for watching.

Donnie/ Sinbad the Sailor Man

Friday, May 17, 2013

Update of the Aquaponics Build at Sowles Well Service~ May 16th 2013

The Aquaponics Build Brought to You

by

 Poetry Writes & Other Stuff

from 

Sinbad the Sailor Man


 Update of the Aquaponics Build at Sowles Well Service May 16th 2013

Published on May 16, 2013
 
Recorded on May 16, 2013 using a Flip Video camera. Oh Happy Day! The Big tank is set and ready to be filled. We have the Greenhouse rails. Pressure treated 2x6 and 2x4's. They still need to be installed upon the poles and the end will need to be temporarily braced until the Hoops are installed.

We are going to be using Cattle panel fencing to create our Hoops As they are cheap fast and easy and they appear to be much more sturdier then the single pole Hooping.

There is a posting here at the Water, Plants, and Fish? Blog Called Greenhouse~ "Homemade with Cattle Panels" : http://waterplantsandfishgrowyourown.... You can Kind of see what we are trying to duplicate here in this video. Well I will be posting this new Video there soon I got to get a shower because I stink.

TTFN
CYA Later Taters
Thanks for watching.

Donnie/ Sinbad the Sailor Man

Well Mother Nature Got me again today rain rain go away come again some other day Little Donnie Wants to Play with His Aquaponics Garden. Yeah a I am a little off or out there some times but aren't we all ? You got to live a little.  

Well I will get some help tomorrow and we will see about getting the rails up and Maybe get some more bricks and some re-purposed wood for shoring and leveling the beds and NFT Piping. I will also see If I can't get some wire run and buried and A Box to power the Green House Lighting. I will be trying to find 6 mil. Plastic at least 50x25 for this House and If everything goes well and I get some more support and help with this Venture. Then I will invest in a standard Greenhouse cover. 

I am still looking for Fish and If I missed out on the seasons offerings. I will go Sane the near by creeks or start off with a ton of cheap gold fish and use them for feeders later. I spotted a metal through over at my uncles. I'll see if I can't talk him out of it for a worm bed to raise some Red Wigglers to eat the algae that will grow in the rock beds [the flood and drain system] part of our build, but I won't need them for several weeks or even a couple of months. Which will give them time to reproduce and get acclimated to the trough. Then I'll see if I can't find some good buckets and try to build a couple of Solider Fly traps also. These both will help fed the fish as they grow and offset the cost of feeding them. as both of these are free and easy to catch and gather quickly out here in the country.

I talked to my cousin also about building an old time Ice House since we have all the available requirements to build one. The dirt mounds and a pond near by. There will be more talk on this later, a combo Root Cellar Ice House would be a nice thing to have if the Grid every did go down fully or for a longer length of time.  Or if the prices jump off the scales overnight.

Well I am still a ways away from pluming and turning the water on. But I do want to start my seedlings this coming week. Maybe that will set a fire under my butt, will see. I have got to run. I am way behind posting into my other Blogs, but as I have said before. I do believe this to be a greater priority just now.

TTFN
CYA Later Taters
Thanks for watching.

Donnie/ Sinbad the Sailor Man 

Saturday, May 4, 2013

Update of the Aquaponics Build at Sowles Well Service May 2nd 2013

The Aquaponics Build Brought to You
by
Poetry Writes & Other Stuff
from
Sinbad the Sailor Man


Published on May 2, 2013
 
Ah here we go the Garden thats what you wanted to see. I have a lot to do when I get some time. I'll be building a mound of dirt or wood chips supported with cement blocks and a couple sheets of 3/4 treated plywood top with 2 inch foam sheets which will hopefully let the tank self level. I am raising the tank so as to be able to have the ability to make it gravity fed which will limit the amount of electrical power to push the water around to the tanks and beds. Well wish us luck this is a big project and it won't take much to change it over to a commercial or small business Venture if it works out some of our youth takes an interest in it. TTFN CYA Later Taters! Thanks fer watching. Donnie/ Sinbad the Sailor Man

Here is a Hubpages.com Hub I wrote about this my New Venture or at least my try at It.

http://sinbadsailorman.hubpages.com/hub/Well-I-Am-About-to-Start-Another-Adventure-The-Aquaponics-Garden

I am steadily trying to get this up and running but I can only work on it after work  an hour here and there. So I think I got quite a bit done with very little help so far except for some heavy lifting  I have done most of what you see so far If I can do It so can you where there is a will there is a way.

P.S. The 4 inch white PVC pipes are call NFT System

Nutrient Film Technique or NFT is a hydroponic technique wherein a very shallow stream of water containing all the dissolved nutrients required for plant growth is re-circulated past the bare roots of plants in a watertight gully, also known as channels.

In an ideal system, the depth of the recirculating stream should be very shallow, little more than a film of water, hence the name 'nutrient film'.

This ensures that the thick root mat, which develops in the bottom of the channel, has an upper surface, which, although moist, is in the air. Subsequent to this, an abundant supply of oxygen is provided to the roots of the plants.

A properly designed NFT system is based on using the right channel slope, the right flow rate, and the right channel length. The main advantage of the NFT system over other forms of hydroponics is that the plant roots are exposed to adequate supplies of water, oxygen and nutrients.

In all other forms of production, there is a conflict between the supply of these requirements, since excessive or deficient amounts of one results in an imbalance of one or both of the others.

NFT, because of its design, provides a system wherein all three requirements for healthy plant growth can be met at the same time, provided that the simple concept of NFT is always remembered and practiced.

The result of these advantages is that higher yields of high-quality produce are obtained over an extended period of cropping. A downside of NFT is that it has very little buffering against interruptions in the flow, e.g., power outages, but, overall, it is one of the more productive techniques.

The same design characteristics apply to all conventional NFT systems. While slopes along channels of 1:100 have been recommended, in practice it is difficult to build a base for channels that is sufficiently true to enable nutrient films to flow without ponding in locally depressed areas.

As a consequence, it is recommended that slopes of 1:30 to 1:40 be used. This allows for minor irregularities in the surface, but, even with these slopes, ponding and water logging may occur. The slope may be provided by the floor, or benches or racks may hold the channels and provide the required slope.

Both methods are used and depend on local requirements, often determined by the site and crop requirements.

As a general guide, flow rates for each gully should be 1 litre per minute. At planting, rates may be half this, and the upper limit of 2L/min appears about the maximum. Flow rates beyond these extremes are often associated with nutritional problems.

Depressed growth rates of many crops have been observed when channels exceed 12 meters in length. On rapidly growing crops, tests have indicated that, while oxygen levels remain adequate, nitrogen may be depleted over the length of the gully. As a consequence, channel length should not exceed 10–15 meters.

In situations where this is not possible, the reductions in growth can be eliminated by placing another nutrient feed halfway along the gully and reducing flow rates to 1L/min through each outlet.[1]


Well I got to run Because I am under the gun.
TTFN
CYA Later Taters
Thanks for watching.

Donnine/ Sinbad the Sailor Man